For decades there was a particular efficient method to keep data on a computer – employing a disk drive (HDD). Nevertheless, this sort of technology is already demonstrating it’s age – hard disk drives are really noisy and sluggish; they’re power–hungry and frequently produce a lot of warmth for the duration of intensive procedures.

SSD drives, on the other hand, are fast, use up way less energy and are also far less hot. They provide an exciting new method to file access and storage and are years in advance of HDDs with regards to file read/write speed, I/O efficiency and then energy efficacy. See how HDDs fare up against the modern SSD drives.

1. Access Time

Due to a revolutionary new method of disk drive operation, SSD drives make it possible for faster file accessibility speeds. With an SSD, data access instances are much lower (just 0.1 millisecond).

The concept driving HDD drives dates all the way to 1954. Even though it’s been substantially processed over the years, it’s nonetheless no match for the imaginative ideas powering SSD drives. Using today’s HDD drives, the top file access speed you’ll be able to attain varies between 5 and 8 milliseconds.

2. Random I/O Performance

Due to the brand–new revolutionary data file storage solution incorporated by SSDs, they give you swifter data access rates and faster random I/O performance.

During our tests, all SSDs revealed their capacity to take care of at the very least 6000 IO’s per second.

During the exact same tests, the HDD drives demonstrated to be considerably slower, with simply 400 IO operations maintained per second. Although this feels like a large amount, if you have a hectic server that hosts loads of well–liked web sites, a slow hard disk drive may result in slow–loading sites.

3. Reliability

SSD drives are designed to include as fewer rotating parts as feasible. They use a comparable technique like the one utilized in flash drives and are also much more reliable compared with standard HDD drives.

SSDs provide an common failing rate of 0.5%.

For the HDD drive to function, it has to rotate a couple metal disks at a minimum of 7200 rpm, keeping them magnetically stabilized in the air. There is a substantial amount of moving elements, motors, magnets and other tools stuffed in a small place. Therefore it’s no wonder that the standard rate of failing of an HDD drive can vary somewhere between 2% and 5%.

4. Energy Conservation

SSD drives are far small compared to HDD drives and they lack any moving parts at all. It means that they don’t generate as much heat and need considerably less electricity to function and fewer energy for chilling reasons.

SSDs take in between 2 and 5 watts.

HDD drives can be notorious for being loud; they’re liable to overheating and whenever you have several hard drives in a server, you must have an extra a / c system exclusively for them.

In general, HDDs use up somewhere between 6 and 15 watts.

5. CPU Power

The swifter the data accessibility speed is, the quicker the file calls are going to be processed. Consequently the CPU won’t have to arrange allocations expecting the SSD to answer back.

The standard I/O delay for SSD drives is 1%.

HDD drives permit slower accessibility rates than SSDs do, resulting in the CPU needing to hold out, although scheduling assets for your HDD to discover and give back the required data.

The common I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Almost all of our brand–new machines now use exclusively SSD drives. Each of our lab tests have shown that by using an SSD, the typical service time for an I/O request while doing a backup continues to be below 20 ms.

Throughout the exact same trials sticking with the same hosting server, this time equipped out utilizing HDDs, performance was noticeably sluggish. Throughout the hosting server back up procedure, the typical service time for any I/O calls ranged somewhere between 400 and 500 ms.

7. Backup Rates

One more real–life improvement will be the speed at which the backup is produced. With SSDs, a server backup now requires under 6 hours using our server–enhanced software.

We applied HDDs exclusively for lots of years and we have now very good knowledge of just how an HDD functions. Creating a backup for a hosting server designed with HDD drives will take around 20 to 24 hours.

To be able to automatically improve the general performance of your respective sites without needing to alter just about any code, an SSD–powered website hosting service will be a great solution. Look at the Linux shared web hosting packages packages plus our Linux VPS web hosting packages – our services highlight really fast SSD drives and are offered at affordable prices.

  • Service guarantees

  • Our Virtual Private Servers come with no setup costs and operate in a dependable network offering 99.9% of uptime. Full admin server access guaranteed.
  • Compare our prices

  • Effortlessly review the allocations and features provided by all of our Virtual Private Servers. See exactly which VPS Web Hosting configuration will give you everything that you will need to take care of your dynamic web presence comfortably.
  • Compare our hosting plans
  • Contact Us

  • Get in touch with us 24 hours a day by email or by employing Quality Discount Hosting’s ultra–fast ticketing platform. Our techs are ready to respond to your queries within 1 hour.